-
150K Rigless Snubbing SnitAbstract:
150K rigless snubbing unit can be used as both a stand-alone snubbing unit or rig assist snubbing unit to work with a conventional work-over rig.
Details
TT150K rigless snubbing unit can be used as both a stand-alone snubbing unit or rig assist snubbing unit to work with a conventional work-over rig.
Power Jack
2 hydraulic cylinders | |
Max. lifting force: | 142,000 lb [64.55t] |
Max. snubbing force: | 85,000 lb [38.56t] |
Stroke length: | 138″ [3.5m] |
Bore size: | 7-1/16” [180mm] |
Slip sets
4 hydraulic-operated slip sets | |
Pipe size range: | 1”~5-1/2”(25.4mm~139.7mm) |
Max. load: | 240,000 lb (62 tons) |
Bore size: | 7-1/16” [180mm] |
Hydraulic operated |
Power Rotary
Max. torque | 3300 ft.lb, |
Max. speed | 100 rpm |
Bore size: | 7-1/16” (180 mm) |
Annular BOP
QTY: | 1 ea. |
Bore size: | 7-1/16” [ 180mm] |
Pressure rating: | 5000psi(35MPa) |
Element material: | Natural rubber |
NACE MR01-75 compliance | Yes |
Ram preventer
Upper Ram Preventer | 1 ea. QRC type |
Lower Ram Preventer | 1 ea. QRC type |
Bore size: | 7-1/16” [ 180mm] |
Pressure rating: | 5000psi(35MPa) |
Pipe range: | 1”~5-1/2”(25.4mm~139.7mm) |
NACE MR01-75 compliance | Yes |
Upper work basket
Working area: | 96.5” (2.45m) x 71” (1.80m) |
Lower workbasket
Working area:: | 75” (1.90m) x 72” (1.83m) |
Tubing handling gin pole
A 3 section telescoping gin pole | |
Retracted length | 22ft (6.70m) |
Extended height from slip to sheave: | 46 ft (14 m) |
Max. load: | 2500lbs (1134kg) |
Counter-Balance winches: | Qty:2 ea. |
Max. Load: 500lbs (226.5kgs) | |
With brake system |
Tong ram and arm
Type: | Hydraulic powered telescope |
Max. Stroke: | 100”(2540mm) |
Max. load: | 2,500 lbs (1,134 kg) |
Power Pack
Housing: | 20 ft sea container |
Diesel engine: | Cat C-13 Grade C, 440HP |
Hydraulic pumps: | 7ea. Hydraulic pumps |
Accumulator bottles: | 5 ea. 11 gal low-temp bottles |
Emergency Power storage: | 1 ea. High pressure Nitrogen bottle |
Hydraulic Reservoir: | Capacity: 450gal (1703 Liters) |