-
Valve replacing under pressure （VRUP）toolAbstract：
VRUP tool is designed and manufactured based on the principle of down hole packer, using hydraulic control
Details
VRUP tool is designed and manufactured based on the principle of down hole packer, using hydraulic control, slip system and rubber element to set a and seal a plug in the tubing section close to the wellhead or inside the tubing head spool.
so the pressure above the VRUP tool can be bled off, and the well head valves can be replaced without seeing any wellbore pressure.
VRUP specifications
| Hydraulic power pack： | To provide hydraulic power to the VRUP tool |
| Pressure Rating： | 21.5MPa |
| Pump rate： | 2.5L/min |
| Hand pump: | To provide setting pressure to the plug |
| Pressure rating： | 50MPa |
| Capacity： | ８L |
| Running and retrieval tool (Hydraulic cylinder set): | To run and retrieve the VRUP tools |
| Model： |
|
| Pressure rating： | 35MPa |
| Plug retainer： | to retain the plug in the place and from being pushed out by the well bore pressure. |
| Pressure rating： | 50MPa |
| Secondary protection of the plug (A crescent shape flange): | To retain the plug inside the tubing head spool ro prevent the plug from being pushed out by the well bore pressure. |
| Model： |
|
| Pressure rating： | 70MPa |
?
Hydraulic Power Pack
Hand Pump
